SUNLU FilaDryer E2

SUNLU FilaDryer E2

The newest pop-up in 2025, made for engineered materials, helps infinite creation, drying and annealing in one.

Up to 110°C, it can anneal 99.99% of engineering materials on the market, allowing the materials to fulfill their potential and giving your model excellent properties such as extraordinary impact resistance and toughness. Suitable for such as ABS, ABS-CF, ASA, PC, flame retardant PC, PC-ABS, PC-PBT, CoPA, PA6-GF, PA6-CF, PA12-CF, PA612-CF, PA12 etc.

[Fast and Efficient Drying] 500W PTC ultra-high heating power enables your creation to dry faster. It takes only 20 minutes to heat up to 50℃ at room temperature and 30 minutes to heat up to 70℃! Temperature can reach up to 110℃ (high temperature drying needs to take into account the temperature resistance of the filament spool)

[Excellent Airtightness, Super Insulation Effect] A one-piece silicone plug covers the feeder hole, and the cover plate is equipped with sealing silicone strips to isolate outside water vapour from entering the chamber. The all-round dual-chamber design at the top, middle, and bottom achieves a heating temperature exceeding 100°C. Combined with the innovative closure system, the annealing process is more efficient, solving the dual needs of annealing and drying in a single machine.

[Extra Large Interior Space, Super Adaptability] The maximum compatible spool size is Φ250 mm × 153 mm, which is suitable for most regular spools on the market. Tested, it can hold 2 reels of regular 1KG spools, 2 reels of regular 2KG spools or one reel of regular 3KG spools. (Note that the test spools are SUNLU spools; other brands of spools will have slight differences, but they are basically compatible. When using, you need to pay attention to the size of the spool.)

[Strong Compatibility, Adapts to 99% of the use scenarios] Can be applied to both engineering materials and conventional materials. Built-in preset filament settings allow you to apply a preset with just one click. The wire diameter is compatible with most materials on the market (Φ1.75mm, Φ2.85mm). The Teflon tubing included with the product is Φ4*Φ3mm in size and 8cm*2 in length, with an additional 1m*2 length option.

[Strong Safety, No More Worries] Intelligent protection system, two-level temperature control switch, over-temperature will be disconnected, and cooling will be restored. Double-layer heat insulation, when the internal temperature is >100℃, the external touch temperature is only <60℃. Fireproof material grade

[Inspire Engineering Material Potential] Annealing significantly enhances the impact resistance and durability of engineering materials, allowing you to unlock engineering-grade performance in every creation, which can be applied to: drone accessories, helmets, screws and nuts, blower pipes, etc. Models that need to withstand high-intensity impact and durability.