Phaetus APUS Extruder
$129.90
A 155g light weight all metal design with a Nema 14 stepper motor, gives the APUS extruder a perfect balance of rigidity and weight. The aluminium frame improves the heat dissipation of the Nema 14 stepper motor
In stock
APUS Extruder
A 155g light weight all metal design with a Nema 14 stepper motor, gives the extruder a perfect balance of rigidity and weight. The aluminium frame improves the heat dissipation of the Nema 14 stepper motor.
This is a high-end extruder for industrial filaments.
- Filament size: 1.75mm
- Product Size (mm): 67*64*42
- Product Net Weight: 155g
- Product Appearance: Blue
Compatible with all thermoplastic filaments including but not limited to:
- PLA
- ABS
- PETG
- TPU
- PP
- PC
- PA
- PEEK
- PEI
As well as typical composite fibre filaments such as:
- PLA-CF
- ABS-CF
- PETG-CF
- PA-CF/GF
Composite filaments such as steel, wood, boron carbide, tungsten and fluorescence materials can be processed by the extruder as well.
3-Screws-System
Easy maintenance by removing only three screws
Quick swap system
The standard hotend attachment is compatible with hotends from Phaetus & DropEffect.
The hotend attachment can be redesigned and 3D printed to fit a multitude of hotends on the market.
Small Nema 14 stepper motor
Rated Current: 1.0 A.
Holding Torque: 0.12 Nm
Temperature Rise: Less Than 55℃
Max Operating Temperature: 130℃
Weight: 85g
155g light weight all metal design
155g light weight design of the aluminium frame ensures heat dissipation of the stepper motor.
Optimized RNC Dual Drive Gears
Whole Hardness: HRC58+ RNC
Coating Hardness: HV3300
Polished Surface Area Dual Drive
Gears For A Stable Extrusion
6.3 : 1 Gear ratio
6.3 : 1 Gear ratio to ensure high torque
Manual wheel design for easy filament loading and unloading
Easy loading and unloading of filament using the manual wheel
Aluminum frame
High rigidity
Aluminium gear
Ensure efficient torque transfer
Hardened Steel Dual Drive gear
Excellent grip and wear resistance
Aluminium Idler arm
Ensure good gear contact
Aluminium filament guide
High wear resistance
Accessories List
- Motor Extension Cable -5cm(Molex Micro Fit 3.0-DuPont TJC8-4)
- Motor Extension Cable -5cm(Molex Micro Fit 3.0-JSTXHP-4)
- H2.0 Hex Key
- H2.5 Hex Key
- Button Head Socket Cap Screw M3x12
- Cup Head Screw M2.5×12
Optimized RNC Dual Drive Gears
The APUS extruder has gear ratio of 6.3/1 and the gears have a co-prime number of teeth for an optimal gear design. The teeth on the Dual Drive gear system were optimized to perfectly grip all kinds of filaments and are RNC hardened. This hardening process enhances the wear resistance and gives the Dual Drive gears a polished surface. A tightly constricted filament path makes the extruder more reactive and as such ensures that the extrusion process is as consistent as possible. Using the manual wheel, the user can easily load and unload the filament without having to rely on a Gcode load and unload macros.
Universal Hotend Mounting System
In the modern 3D printing era high-speed printing is becoming more important. This is why the APUS extruder was designed in such a way that the centre of mass is as close as possible to the mounting system, even when a hotend is installed. This ensure that the moment acting on the mounting system is small. The extruder adopts the “three screw system”: two screws to remove the hotend and one screw to loosen the Idler. With this the user has complete access to the filament path. This system also allows to “quick swap” hotends conveniently. This ”quick swap system” can be 3D printed and as such it can be redesigned to fit any kind of hotend.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 15 × 5 cm |
| Brand |
Reviews
There are no reviews yet.