Tag: heat insert

Showing all 4 results

Quick View

Heat Insert Tool Kit
Price range: $12.90 through $13.90
Install your M2 to M8 threaded heat inserts with ease and precision with this insert tool kit. Includes brass soldering iron tip and 6-7 adapters for M2, M2.5, M3, M4, M5, M6, and optional M8 heat inserts, suitable for all sorts of builds.
Select options This product has multiple variants. The options may be chosen on the product page Details
Quick View

Heat Insert Tool Kit – C245
$19.90
Install your M2 to M8 threaded heat inserts with ease and precision with this insert tool kit. Includes C245 Heat core, brass soldering iron tip, and 7 adapters for M2, M2.5, M3, M4, M5, M6, and M8 heat inserts, suitable for all sorts of builds.
Add to cart Details Buy Now
Out of Stock
Sold Out
Quick View

LDO Heat Insert Tool Kit (includes 50pc M3x5x4 heat set inserts)
$14.90
Install your M3 threaded heat set inserts with ease and precision with this insert tool kit from LDO motors. Includes brass soldering iron tip and 50 M3x5x4 heat set inserts, suitable for Voron builds.
Read more Details

Quick View

LDO Input Shaper Toolkit
$24.90
The LDO Input Shaper Toolkit comes with all the necessary parts for performing Klipper input shaper calibration with minimal hassle.
Add to cart Details Buy Now

Blair Hammond

5

Ive been buying most... Read More
Ive been buying most of my filament from 3DEA for years now. I can't think of a single time I've been let down. Wide selection that's very very rarely out of stock, and their "house Brand" is nicely priced and prints bloody good. Read Less

H S

5

Had a bunch of quest... Read More
Had a bunch of questions for the team here and they were nothing but extremely helpfula perfect start to the whole 3d printing shenanigantop team and good prices too cant recommend more Read Less

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less

Write a review!

Tag: heat insert

Heat Insert Tool Kit

Heat Insert Tool Kit – C245

LDO Heat Insert Tool Kit (includes 50pc M3x5x4 heat set inserts)

LDO Input Shaper Toolkit

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA