Tag: Like Rock

Name: 3DEA
Address: Keith Hay Court, Silverdale, Auckland, 0932
Rating: 4.6

Like Rock

Showing all 9 results

Quick View
HTPLA – Brass-filled Metal Composite
$99.90
0.5kg - Metal Composite Brass
Brass-Filled Metal Composite HTPLA. Using real brass powder, Proto-pasta created a premium heat treatable metal PLA filament for 3D prints that finish just like real metal!
Add to cart Buy Now
Quick View
HTPLA – Bronze-filled Metal Composite
$99.90
0.5kg - Metal Composite Bronze
Bronze-Filled Metal Composite HTPLA. Using real bronze powder, Proto-pasta created a premium heat treatable metal PLA filament for 3D prints that finish just like real metal!
Add to cart Buy Now
Quick View
HTPLA – Copper-filled Metal Composite
$99.90
0.5kg - Metal Composite Copper
Copper-Filled Metal Composite HTPLA. Using real copper powder, Proto-pasta created a premium heat treatable metal PLA filament for 3D prints that finish just like real metal!
Add to cart Buy Now
Quick View

HTPLA – Light Gray Carbon Fibre Composite
$69.90
0.5kg - CF Light Grey
Proto-pasta Carbon Fibre Composite is a combination of milled carbon Fibres and high-performance PLA. Resulting 3D prints made with our Carbon Fibre HTPLA are demonstrably more rigid, providing excellent structural strength and layer adhesion with very low warpage.
Add to cart Buy Now
Quick View
HTPLA – Matte Fibre – Grey
$54.90
0.5kg - MF Grey
A neutral gray reminiscent of concrete or stone. Gray Matte Fibre HTPLA feels industrial, but uses plant Fibres for texture and sheen. Great for both artistic and technical parts with no special hardware required!
Add to cart Buy Now
Quick View

HTPLA – Medium Gray Carbon Fibre Composite
$69.90
0.5kg - CF Medium Grey
Proto-pasta Carbon Fibre Composite is a combination of milled carbon Fibres and high-performance PLA. Resulting 3D prints made with our Carbon Fibre HTPLA are demonstrably more rigid, providing excellent structural strength and layer adhesion with very low warpage.
Add to cart Buy Now
Quick View
HTPLA – White Marble
$58.90
0.5kg - White
A milky white, full of black fleck for plenty of depth and sheen
Add to cart Buy Now
Quick View
PP PLA – Iron-filled Metal Composite
$69.90
0.5kg - Metal Composite Iron
Protopasta Rustable Magnetic Iron Metal PLA Composite is actually ferromagnetic. It responds to magnets and behaves similarly to pure iron! Encapsulated in plastic, the iron maintains a stable matte, cast metal finish as printed, but can be rusted when desired.
Add to cart Buy Now
Quick View
PP PLA – Steel-filled Metal Composite
$99.90
0.5kg - Metal Composite Steel
Protopasta Stainless Steel PLA filament is a dense material that prints as easily as standard PLA but results in heavy cast metal looking prints that can be brushed, sanded, or polished post-print to achieve amazing results.
Add to cart Buy Now

Andrew Jackson

5

I was directed to 3D... Read More
I was directed to 3DEA by a work colleague as I was new to 3D printing and they were right about them. Great quality PLA (and many other types), awesome range of colours and great pricing. I've bought 4 different rolls so far and they have all been great, no clogging and brilliant print quality. Read Less
Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Bryn Parrott

5

3DEA Carry a wide ra... Read More
3DEA Carry a wide range of filaments, from various known brands as well as their own brand. The service is superb, the product range wide, and the products print well. Nothing more to be said. Read Less

Write a review!

Tag: Like Rock

Like Rock

HTPLA – Brass-filled Metal Composite

HTPLA – Bronze-filled Metal Composite

HTPLA – Copper-filled Metal Composite

HTPLA – Light Gray Carbon Fibre Composite

HTPLA – Matte Fibre – Grey

HTPLA – Medium Gray Carbon Fibre Composite

HTPLA – White Marble

PP PLA – Iron-filled Metal Composite

PP PLA – Steel-filled Metal Composite