eSUN Hard-tough Resin – White 0.5kg

Packaged in a durable aluminium bottle

– High impact strength;
– Higher shock resistance than normal resin;
– Rigid resin, excellent mechanical properties such as hardness, tensile and bending;
– High surface hardness and wear resistance.

Print Setting:

Applicable wavelength: 395-405nm
Operating temperature: 18-35°C
Exposure time: 20-30s on the bottom layer, 8s on the normal layer
Please adjust the setting until you get the best print performance.

Instructions for use:

(1) Before use:
Shake the liquid resin before use;
Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
Please wear gloves and stay in ventilated environment.

(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.

(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution; high pressure mercury lamp or LED lamp (launch peak is between 360-405 nm); oven.

(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade;
B, Submerge the model in the cleaning solution, rinsed or ultrasonically washed for 1 minute, then taken out and drained;
C. Submerge the model completely in distilled water, uniformly irradiated with high-pressure mercury lamp, LED lamp, or exposed to sunlight;
D, Place the model in an oven, set to heat at 50℃ for 20 minutes, and then naturally cooled to room temperature;
E. Proper processing, such as removing support, polishing, colouring, etc.