10 rolls mixed colour.

Most colours are limited to two per pack – black, white, silver and some other common colours are limited to 5.
For the 2.85mm dimension all products are limited to two per colour.

eSUN PLA+ 3D Printer Filaments are a popular choice with a lot of good user feedback. It is tougher than regular PLA.

ADVANTAGES:
– suitable for printing larger models
– toughness is higher than regular PLA
– less stringing, the surface of the printouts will be smoother and more delicate
– no cracking problem
– FDA food safe approved

PLA + Printing Parameters:
Best print temperature: 205-225 °C
Base temperature: 0/65 °C
Feed speed: 30-90mm / s
Idling speed: 90-150mm/s

Filament diameter:1.75mm:±0.02mm
Certification: ROHS Certified, REACH
Materials: Polylactic acid plus (PLA+)

Brand	eSun

eSun Olive Green PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Olive Green

eSun White PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	White

eSun Cold White PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Cold White

eSun Blue PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Blue

eSun Red PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Red

eSun Orange PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Orange

eSun Silver PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Silver

eSun Grey PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Grey

eSun Light Blue PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Light Blue

eSun Magenta PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Magenta

eSun Bone White PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Bone White

eSun Dark Blue PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Dark Blue

eSun Black PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Black

eSun Yellow PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Yellow

eSun Green PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Green

eSun Pink PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Pink

eSun Peak Green PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Peak Green

eSun Purple PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Purple

eSun Gold PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Gold

eSun Pine Green PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Pine Green

eSun Beige PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Beige

eSun Brown PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Brown

eSun Light Brown PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Light Brown

eSun Fire Engine Red PLA+ 1.75mm

Weight	1 kg
Brand	eSun
Colour	Fire Engine Red

eSun Black PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Black
Dimension	3mm

eSun White PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	White
Dimension	3mm

eSun Cold White PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Cold White
Dimension	3mm

eSun Blue PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Blue
Dimension	3mm

eSun Red PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Red
Dimension	3mm

eSun Yellow PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Yellow
Dimension	3mm

eSun Peak Green PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Peak Green
Dimension	3mm

eSun Olive Green PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Olive Green
Dimension	3mm

eSun Silver PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Silver
Dimension	3mm

eSun Grey PLA+ 2.85mm

Weight	1 kg
Brand	eSun
Colour	Grey
Dimension	3mm

Reviews

There are no reviews yet.

Be the first to review “eSun PLA+ 10x 1Kg – Mixed”

Andrew Jackson

5

I was directed to 3D... Read More
I was directed to 3DEA by a work colleague as I was new to 3D printing and they were right about them. Great quality PLA (and many other types), awesome range of colours and great pricing. I've bought 4 different rolls so far and they have all been great, no clogging and brilliant print quality. Read Less
Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Bryn Parrott

5

3DEA Carry a wide ra... Read More
3DEA Carry a wide range of filaments, from various known brands as well as their own brand. The service is superb, the product range wide, and the products print well. Nothing more to be said. Read Less

Write a review!

	Product	Quantity
	eSun Olive Green PLA+ 1.75mm eSun Olive Green PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Olive Green PLA+ 1.75mm quantity
	eSun White PLA+ 1.75mm eSun White PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun White PLA+ 1.75mm quantity
	eSun Cold White PLA+ 1.75mm eSun Cold White PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Cold White PLA+ 1.75mm quantity
	eSun Blue PLA+ 1.75mm eSun Blue PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Blue PLA+ 1.75mm quantity
	eSun Red PLA+ 1.75mm eSun Red PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Red PLA+ 1.75mm quantity
	eSun Orange PLA+ 1.75mm eSun Orange PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Orange PLA+ 1.75mm quantity
	eSun Silver PLA+ 1.75mm eSun Silver PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Silver PLA+ 1.75mm quantity
	eSun Grey PLA+ 1.75mm eSun Grey PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Grey PLA+ 1.75mm quantity
	eSun Light Blue PLA+ 1.75mm eSun Light Blue PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Light Blue PLA+ 1.75mm quantity
	eSun Magenta PLA+ 1.75mm eSun Magenta PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Magenta PLA+ 1.75mm quantity
	eSun Bone White PLA+ 1.75mm eSun Bone White PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Bone White PLA+ 1.75mm quantity
	eSun Dark Blue PLA+ 1.75mm eSun Dark Blue PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Dark Blue PLA+ 1.75mm quantity
	eSun Black PLA+ 1.75mm eSun Black PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Black PLA+ 1.75mm quantity
	eSun Yellow PLA+ 1.75mm eSun Yellow PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add Out of stock Out of stock	eSun Yellow PLA+ 1.75mm quantity
	eSun Green PLA+ 1.75mm eSun Green PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Green PLA+ 1.75mm quantity
	eSun Pink PLA+ 1.75mm eSun Pink PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Pink PLA+ 1.75mm quantity
	eSun Peak Green PLA+ 1.75mm eSun Peak Green PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Peak Green PLA+ 1.75mm quantity
	eSun Purple PLA+ 1.75mm eSun Purple PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Purple PLA+ 1.75mm quantity
	eSun Gold PLA+ 1.75mm eSun Gold PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Gold PLA+ 1.75mm quantity
	eSun Pine Green PLA+ 1.75mm eSun Pine Green PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Pine Green PLA+ 1.75mm quantity
	eSun Beige PLA+ 1.75mm eSun Beige (former Skin Colour) PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Beige PLA+ 1.75mm quantity
	eSun Brown PLA+ 1.75mm eSun Brown PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Brown PLA+ 1.75mm quantity
	eSun Light Brown PLA+ 1.75mm eSun Light Brown PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Light Brown PLA+ 1.75mm quantity
	eSun Fire Engine Red PLA+ 1.75mm eSun Fire Engine PLA+ Filament 1.75mm - comes on a vacuum packed 1KG roll Add In stock	eSun Fire Engine Red PLA+ 1.75mm quantity
	eSun Black PLA+ 2.85mm eSun Black PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Black PLA+ 2.85mm quantity
	eSun White PLA+ 2.85mm eSun White PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun White PLA+ 2.85mm quantity
	eSun Cold White PLA+ 2.85mm eSun Cold White PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Cold White PLA+ 2.85mm quantity
	eSun Blue PLA+ 2.85mm eSun Blue PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add Out of stock Out of stock	eSun Blue PLA+ 2.85mm quantity
	eSun Red PLA+ 2.85mm eSun Red PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Red PLA+ 2.85mm quantity
	eSun Yellow PLA+ 2.85mm eSun Yellow PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add Out of stock Out of stock	eSun Yellow PLA+ 2.85mm quantity
	eSun Peak Green PLA+ 2.85mm eSun Peak Green PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add Only 1 left in stock	eSun Peak Green PLA+ 2.85mm quantity
	eSun Olive Green PLA+ 2.85mm eSun Olive Green PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Olive Green PLA+ 2.85mm quantity
	eSun Silver PLA+ 2.85mm eSun Silver PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Silver PLA+ 2.85mm quantity
	eSun Grey PLA+ 2.85mm eSun Grey PLA+ Filament 2.85mm - comes on a vacuum packed 1KG roll Add In stock	eSun Grey PLA+ 2.85mm quantity