PrusaClone i3 MK3S Bear 2.1 Printer Kit
$999.90
High quality Cloned Prusa i3 MK3S Printer Kit with Bear 2.1 upgraded parts including printed parts.
Only 1 left in stock
Before buying this kit please note the following disclaimers/information.
- If you have never touched a 3D printer, do not buy this kit.
- It is recommended you read the assembly manual in completion before committing to purchase and build a kit.
- Please note that we do not provide technical / building support for these kits but there are video guides, full build videos and community pages online.
This is a complete kit including all printed parts!
Image is indicative only. Printed parts and extrusions are in black.
Assembly guide：
Frame
Extruder(Best to read all the assembly steps of MK3S)
Reference videos:
https://www.youtube.com/watch?v=9ttsCbnQWk4
https://www.youtube.com/watch?v=B1nH5McIwdA
BOM:
| PRODUCT | DESCRIPTION | QUANTITY |
| Stepper Motor Kits | 5pcs/set | 1 |
| Assembled Power Supply Kits | 24V 10A Assembled | 1 |
| USB Wire | 1 | |
| Foot pad | 4 | |
| LM8UU | MYT LM8UU | 10 |
| Black Nylon tube | 1 | |
| Heater cartridge 24V 50W | 1 | |
| 104GT-2 Thermistor wire | 1 | |
| V6 Hotend | V6 Hotend (with titaninum alloy heatbreak) | 1 |
| 5015 5V Air blower fan | 1 | |
| 4010 5V Cooling fan | 1 | |
| BHCS Screws | M5*8 | 58 |
| M5*10 | 22 | |
| M5*12 | 10 | |
| M5*16 | 4 | |
| M4*10 | 2 | |
| Self-tapping Screws | M5*13 | 4 |
| SHCS Screws | M2*8 | 1 |
| M3*10 | 35 | |
| M3*12 | 2 | |
| M3*18 | 10 | |
| M3*14 | 6 | |
| M3*20 | 4 | |
| M3*30 | 1 | |
| M3*40 | 8 | |
| Black conic screws | M3*10 | 6 |
| M4*8 | 2 | |
| M4*10 | 1 | |
| Hammer Nut | 2020-M5 | 90 |
| M3 nylon nut | M3 | 10 |
| Nut | M3 | 18 |
| Spring | 0.8*5*15mm | 2 |
| M3NS Nut | M3 nut | 18 |
| Hardened steel dual driver gear kit | 1 | |
| U nut kit | 3pcs U nut M3*25+ 6pcs M3 nylon nut | 1 |
| Spacer kits | 9pcs spacer (OD6*ID3*H6mm)+9 pcs conic screw M3*12mm | 1 |
| Smooth rod kits | 2pcs Z axis M8*320mm, 2pcs Y axis M8*330mm, 2pcs X axis M8*370mm. Black 8mm nylon sleeve 30cm 2pcs, 1pcs 12mm nylon sleeve 50cm | 1 |
| GT2-6mm belt/pulley kits | GT2-6 20T idler pulley, inner bore 3mm | 2 |
| GT2-6 timing pulley, 16T, inner bore 5mm | 2 | |
| Gates GT2-6mm timing belt, X axis-850mm, Y axis-650mm | 1 | |
| 2040V extrusions | 331MM*2PCS,290MM*1PC,359MM*2PCS,370MM*2PCS | |
| 2020 5 hole plate | black | 10 |
| 2020 corner | black | 4 |
| EINSY Rambo 1.1b mainboard | 1 | |
| PINDA V2 Inductive sensor | 1 | |
| Nylon type 30pcs | 1 | |
| LCD2004 display | 1 | |
| MK52 PCB heatbed Kits | with magnets, with NTC100K thermistor wires, with heating wires | 1 |
| Flexible plates | 254*241mm spring steel sheet with one side PEI powder textured the other side smooth PEI coated | 1 |
| Sensor kits | 1. IR filament sensor with wires 2.magnets 4pcs 3. steel ball 2pcs, 4.screws M3X18,M3X10,M2X8 each 1pcs 5. M3 nuts 4pcs | 1 |
| PETG Printed Parts | 1 | |
| X carriage | 1 | |
| Power cable | 1.5m | 1 |
| Tools | Allen key 1.5/2.0/2.5/3.0 (with ball head) | 1 |
| side cutter | 1 |
While we strive to provide the most accurate and detailed information for this printer kit, please note that there might be slight variations due to manufacturing nuances and updates.
| Weight | 10 kg |
|---|---|
| Brand |
Reviews
There are no reviews yet.