Category: PETG eSun

Showing all 14 results

Out of Stock
Sold Out
Quick View

10x eSun Black PETG 1.75mm
$320.00
10kg - Black
10x eSun Black PETG Filament 1.75mm – comes as an outer unit of 10 vacuum packed 1KG rolls.
Read more Details

Quick View

eSun – PET-CF (Black) PET-Carbon Fibre Composite 1.75mm
$84.90
1kg - Carbon Fibre (Black)
eSUN PET-CF is a high-performance, carbon fiber-reinforced filament offering ultra-low moisture absorption, high rigidity, and excellent printability for demanding engineering applications.
Add to cart Details Buy Now

Quick View

eSun – PETG-CF (Black) PETG-Carbon Fibre Composite 1.75mm
$59.90
1kg - Carbon Fibre (Black)
eSUN’s PETG-CF material is reinforced with carbon fibres to significantly enhance strength, rigidity, and hardness while reducing warping.
Add to cart Details Buy Now

Quick View

eSun PETG – Black Solid 1.75mm
$34.50
1kg - Black
eSun PETG Black 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Out of Stock
Sold Out
Quick View

eSun PETG – Blue Solid 1.75mm
$34.50
1kg - Blue
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Read more Details

Quick View

eSun PETG – Green Solid 1.75mm
$34.50
1kg - Green
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Out of Stock
Sold Out
Quick View

eSun PETG – Grey Solid 1.75mm
$34.50
1kg - Grey
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Read more Details

Quick View

eSun PETG – Natural 1.75mm
$34.50
Rated 5.00 out of 5
1kg - Natural/Transparent
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – Orange Solid 1.75mm
$34.50
1kg - Orange
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – Purple Solid 1.75mm
$34.50
1kg - Purple
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – Red Solid 1.75mm
$34.50
1kg - Red
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – Silver Solid 1.75mm
$34.50
1kg - Silver
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – White Solid 1.75mm
$34.50
1kg - White
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Quick View

eSun PETG – Yellow Solid 1.75mm
$34.50
1kg - Yellow
eSun PETG 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a semi-rigid material with good impact resistance and ideal for food grade projects.
Add to cart Details Buy Now

Blair Hammond

5

Ive been buying most... Read More
Ive been buying most of my filament from 3DEA for years now. I can't think of a single time I've been let down. Wide selection that's very very rarely out of stock, and their "house Brand" is nicely priced and prints bloody good. Read Less

Sam Willis

5

Outstanding advice a... Read More
Outstanding advice and service. One conversation and a simple order with them, and we finally have our SunluS9 printer up and running again after weeks of troubleshooting. 10/10 Read Less

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less

Write a review!

Category: PETG eSun

10x eSun Black PETG 1.75mm

eSun – PET-CF (Black) PET-Carbon Fibre Composite 1.75mm

eSun – PETG-CF (Black) PETG-Carbon Fibre Composite 1.75mm

eSun PETG – Black Solid 1.75mm

eSun PETG – Blue Solid 1.75mm

eSun PETG – Green Solid 1.75mm

eSun PETG – Grey Solid 1.75mm

eSun PETG – Natural 1.75mm

eSun PETG – Orange Solid 1.75mm

eSun PETG – Purple Solid 1.75mm

eSun PETG – Red Solid 1.75mm

eSun PETG – Silver Solid 1.75mm

eSun PETG – White Solid 1.75mm

eSun PETG – Yellow Solid 1.75mm

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA