Polymaker Polyterra™ PLA+ - 3DEA https://www.3dea.co.nz/shop/index.php/product-category/plaplus/polymaker-polyterra-plaplus/ Making 3d Printing Affordable! Sat, 31 Jan 2026 23:58:23 +0000 en-NZ hourly 1 https://wordpress.org/?v=6.9.1 https://www.3dea.co.nz/shop/wp-content/uploads/2020/11/cropped-3dea_1-1-32x32.png Polymaker Polyterra™ PLA+ - 3DEA https://www.3dea.co.nz/shop/index.php/product-category/plaplus/polymaker-polyterra-plaplus/ 32 32 PolyTerra PLA+ Black 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-black-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-black-1-75mm/#respond Fri, 20 Jan 2023 08:45:26 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13846 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Black 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Black 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-black-1-75mm/feed/ 0 PolyTerra PLA+ Teal 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-teal-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-teal-1-75mm/#respond Fri, 20 Jan 2023 09:00:42 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13855 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Teal 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Teal 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-teal-1-75mm/feed/ 0 PolyTerra PLA+ Purple 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-purple-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-purple-1-75mm/#respond Fri, 20 Jan 2023 08:59:02 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13853 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Purple 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Purple 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-purple-1-75mm/feed/ 0 PolyTerra PLA+ Yellow 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-yellow-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-yellow-1-75mm/#respond Fri, 20 Jan 2023 08:57:47 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13852 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Yellow 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Yellow 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-yellow-1-75mm/feed/ 0 PolyTerra PLA+ Orange 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-orange-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-orange-1-75mm/#respond Fri, 20 Jan 2023 08:55:57 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13851 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Orange 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Orange 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-orange-1-75mm/feed/ 0 PolyTerra PLA+ Green 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-green-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-green-1-75mm/#respond Fri, 20 Jan 2023 08:54:34 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13850 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Green 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Green 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-green-1-75mm/feed/ 0 PolyTerra PLA+ Blue 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-blue-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-blue-1-75mm/#respond Fri, 20 Jan 2023 08:53:00 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13849 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Blue 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Blue 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-blue-1-75mm/feed/ 0 PolyTerra PLA+ Grey 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-grey-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-grey-1-75mm/#respond Fri, 20 Jan 2023 08:48:43 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13848 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Grey 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Grey 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-grey-1-75mm/feed/ 0 PolyTerra PLA+ White 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-white-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-white-1-75mm/#respond Fri, 20 Jan 2023 08:47:01 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13847 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ White 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ White 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-white-1-75mm/feed/ 0 PolyTerra PLA+ Red 1.75mm https://www.3dea.co.nz/shop/product/polyterra-pla-red-1-75mm/ https://www.3dea.co.nz/shop/product/polyterra-pla-red-1-75mm/#respond Fri, 20 Jan 2023 07:07:12 +0000 https://www.3dea.co.nz/shop/?post_type=product&p=13828 PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

The post PolyTerra PLA+ Red 1.75mm appeared first on 3DEA.

]]> PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.


PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
No, PolyTerra™ PLA+ has a more silky finish.

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 30mm/s – 70mm/s
Fan: ONDirect Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/sDrying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

The post PolyTerra PLA+ Red 1.75mm appeared first on 3DEA.

]]> https://www.3dea.co.nz/shop/product/polyterra-pla-red-1-75mm/feed/ 0