Shop » ABS | ABS+ | ABS Max » eSUN eABS Max 3D Filament 1.75mm
eSUN eABS Max 3D Filament 1.75mm
$38.90
Modified on the basis of ABS, it has higher mechanical properties and UL94V-0 flame retardant performance. The product comes on a vacuum packed 1KG roll.
1kg - Black
In stock
eSUN has now added another high-quality 3D printing product, the eABS MAX halogen-free flame retardant 3D filament. The new product adds the toughness of ABS+ and ensures flame retardant efficiency.
Exclusively available in Australia at Cubic Technology.
Key Features
- Flame retardant
- Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant
- Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance
- Compared with ABS and ABS+, it has better toughness, much improved in craze, edge warping, whole layer stripping situations when printing objects with large corner
- Maintain 90% of physical performance at -20℃ low temperature and won’t crisp
- Waterproof, less than 1% of water absorption in normal temperature, which ensures flame retardant efficiency
- Allow acetone polishing for appearance.
Print Settings
- Best print temperature: 240-270 °C
- Plate temperature: 100-110 °C
- Feed rate: 30-90mm/s
- Idling speed: 90-150mm/s
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | eABS-Max |
Density(g/cm3) | 1.05 |
Heat Distortion Temp(℃,0.45MPa) | 85 |
Melt Flow Index(g/10min) | 60(220℃/10kg) |
Tensile Strength(MPa) | 45 |
Elongation at Break(%) | 30 |
Flexural Strength(MPa) | 58 |
Flexural Modulus(MPa) | 2400 |
IZOD Impact Strength(kJ/㎡) | 48 |
Durability | 8/10 |
Printability | 8/10 |
Recommended printing parameters | |
Extruder Temperature(℃) | 240 – 270℃ Recommended temperature:240℃ |
Bed temperature(℃) | 95 – 110°C |
Fan Speed | 0% |
Printing Speed | 40 – 100mm/s |
Heated Bed | Required |
Recommended Build Surfaces | High temperature tape, PVP solid glue |
Weight | 1 kg |
---|---|
Brand | |
Colour | Black |
Related products
- Quick ViewAdd to cart DetailsBuy Now
CE-ABS – Conductive Black quality 1.75mm Filament – comes on a vacuum packed 1KG Roll. This product is mainly used to print anti-static housing for electronics, circuits or conductive parts.
- Quick ViewAdd to cart DetailsBuy Now
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
- Quick ViewAdd to cart DetailsBuy Now
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
- Quick ViewAdd to cart DetailsBuy Now
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.