Jamg He PLA+ Filament 1.75mm

Rated 5.00 out of 5 based on 1 customer rating

$20.00 – $25.00

Jamg He PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll. Experience unmatched value for money with the JAMG HE PLA 3D Printer Filament.

1kg - Black, Blue, Green, Grey, Orange, Red, Silver, White, Yellow

JAMG HE PLA 3D Printer Filament 1.75mm 1kg Roll – Exceptional Quality at an Unbeatable Price!

Elevate your 3D printing experience with the JAMG HE PLA 3D Printer Filament. Designed for precision and performance, this 1.75mm filament comes on a 1kg roll, available in a vibrant spectrum of colors including Black, Blue, Red, Green, Grey, Orange, White, and Yellow.

Key Features:

High Strength & Toughness: Ensures durable prints with enhanced structural integrity.
Eco-friendly & Non-toxic: Safe for use, emitting no harmful odors.
Resistant to High Temperatures: Provides stability in varying printing conditions.
Glossy Finish: Achieve shiny and visually appealing prints.
Optimized Printing Conditions: Recommended print temperature of 220-240℃, bed temperature of 45-60℃, and a speed of 30-60mm/s.
Universal Compatibility: Works seamlessly with a wide range of high-speed and regular 3D printers.
Precise Diameter: 1.75mm with a variation of +/-0.02mm for consistent print quality.
Broad Temperature Range Processing: Adaptable to different printing environments.
Packaging: Neatly wound on a 1 kg plastic spool for ease of use.

Experience unmatched value for money with the JAMG HE PLA 3D Printer Filament. Whether for professional projects or personal hobbies, this filament guarantees high-quality prints every time. Add a touch of brilliance to your 3D printing with our diverse color range and make your creations stand out!

Note: Color representation may vary across different displays.

Weight	1 kg
Dimensions	21 × 21 × 7 cm
Brand	Jamg He
Colour	Black, Blue, Green, Grey, Orange, Red, Silver, White, Yellow
Material	PLA+

1 review for Jamg He PLA+ Filament 1.75mm

A*****
Rated 5 out of 5
October 25, 2024
Orange not very Orange!
Really like this JH filament for the price. Love the white for prototype printing. Just be aware the Orange is really a pinky orange colour, and nothi...More
Really like this JH filament for the price. Love the white for prototype printing. Just be aware the Orange is really a pinky orange colour, and nothing like eSun PLA+ orange if you are considering it as a substitute.
Helpful? 0 0

Add a review

GLEN20

5

3dea is a real pleas... Read More
3dea is a real pleasure to deal with. Not only do they stock a great range of filament which you can get from other suppliers in NZ. They have a massive range of own-brand filament which is often unique to NZ and is of the highest quality. All in all, 3dea are highly recommended. Read Less
Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

Write a review!

Jamg He PLA+ Filament 1.75mm

1 review for Jamg He PLA+ Filament 1.75mm

Jamg He HS-PLA+ High Speed Filament 1.75mm

PolyTerra PLA+ Purple 1.75mm

PolyTerra PLA+ Blue 1.75mm

3DEA Nozzle Cleaning Filament 1.75mm 0.1kg

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA

Jamg He PLA+ Filament 1.75mm

1 review for Jamg He PLA+ Filament 1.75mm

Related products

Jamg He HS-PLA+ High Speed Filament 1.75mm

PolyTerra PLA+ Purple 1.75mm

PolyTerra PLA+ Blue 1.75mm

3DEA Nozzle Cleaning Filament 1.75mm 0.1kg