TPU 95A – Glow Green 1.75mm

This filament features a gorgeous, luminous finish with a semi-translucent colour under standard light, transitioning to a vibrant glow under UV light. It arrives on an eco-friendly, vacuum-sealed cardboard reel.

TPU
Diameter 1.75mm2 ±0.03
Print Temp 200-230ºC
Hot bed 40-60ºC (not required but recommended)
Surface Blue tape, glue stick, PEI

We highly recommend reducing your print speed when 3D printing TPU. This can be frustrating, especially if you have invested in one of the fastest 3D printers around, but it will be far worse having to continuously unclog your 3D printer’s nozzle if you print too quickly.

We recommend printing at around 20-30mm/s with TPU. This is because TPU’s softness makes it harder to consistently extrude the right amount of filament, which can lead to clogging, errors, and failed prints. It is better overall to go slow and steady rather than keep having to unclog.

Use a build surface like PEI or blue builder’s tape along with a glue stick or similar for adhesion. Be careful, however, if you are using PEI sheets, as TPU adheres very well to them. Use an extra glue stick or another adhesive to prevent parts from pulling off the PEI sheet after printing and fusing.