Making 3d Printing Affordable!

Voron V2.4 R2 300mm Kit (LDO, NO PI)

Original price was: $1,699.00.Current price is: $1,190.00.

Voron 2.4 Corexy V2.4 R2 Version 3D Printer Kit with High Quality Parts 300*300mm DIY Kit

In stock

Sale ends in
0 1 3
Days
0 6
Hours
0 8
Minus
5 7
Secs
On Sale
2/8 Sold
  • Stepper Option

    Hotend Option

    Cable Option

    Printed Parts

    Other Options

Look no further for your Voron 2.4 Kit – we have carefully sourced all the core components that you’ll need to build your very own Voron 2.4 R2. Available in all 2 sizes.  The 2.4 R2 designed by Voron Design is arguably the best DIY 3D Printer project out there.

The Voron 2.4 R2 Kit includes all the core hardware that you will need to build your Voron. You will need to source your own 3D Printed parts, print them yourself or get them from us. The beauty of the Voron 2.4 is just how customizable it is. You can easily swap out core components for upgrades and modify them to your liking. The best part of all, is that you have to build the kit, so working on it will be a breeze. Our Kit includes a Phaetus Dragon High-Flow hotend that will allow you to use it in a Direct Drive Configuration (Afterburner).

For the different options please hover the question mark next to the selected option for additional information! You can upgrade to the LDO motors, simplify cabling, add the input shaper (PI required) or replace the hotend.

Kit includes a genuine Phaetus Dragon High Flow hotend!
Kit does not include a Raspberry PI!
Kit does not include the printed parts – we do offer full and functional kits here. With the functional kit you can assemble the unit to a point where you can print the other parts yourself.

All our products are NZ stock and ready to ship.

Before buying this kit please note the following disclaimers/information.

  1. If you have never touched a 3D printer, do not buy this kit.
  2. It is recommended you read the assembly manual in completion before committing to purchase and build a kit.
  3. Please note that we do not provide technical / building support for these kits but there are video guides and hints and tips online.

Features & Extras

  • Stainless Steel Linear Rails – 12H size rails for X axis included. No more worrying about rusty rails. You’ll still want to grease these rails, but you can do it at the end of your build.
  • Small Tools – We include a small set of Allen key with ball head pack 2mm/3mm/4mm/5mm each size 1 pc.
  • Aluminium Build Plate – MIC6 354*354*8mm build plate imported from USA.
  • Arlon Silicone AC Heater – Edge to Edge special design with built in thermal fuse – so no extra assembly step for that.
  • Genuine Phaetus Dragon High-Flow hotend.
  • BTT Octopus v1.1 Control Board

Add-ons & Upgrades

  • The hotend is optional and you can choose a different one
  • You can upgrade to LDO motors if you prefer
  • You can add the LDO Heat Insert Tool Kit
  • You can add the ready wiring hardness for Octopus/Afterburner including the Afterburner Tool Head PCB Board 4.0, the X/Y Axis Limit Switch XH2.54 4PIN PCB Board, and the Z Axis Endstop PCB Board. If you add this, we’ll leave all standard connectors in the set in addition.
LDO Heat Insert Tool Kit
wiring hardness for Octopus/Afterburner

Tips

Guides

  • Printed Parts: Since printed parts are NOT included with the kit, it’s recommended to get them here if you are unable to print them for yourself.  These are the essential parts for a very reasonable cost to get your printer working. Refer to the Part Printing Guidelines section of the official assembly manual for general print settings. For the latest parts files, visit the Voron Github repository. If you do not have the means to print your own parts in ABS, the Voron Print It Forward program is a great option to obtain the parts at a very reasonable cost or you can get them from us if in stock.
  • Wiring Guide – LDO have created this supplementary wiring guide which is similar to this kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components. Also look at the Octopus wiring directions.
  • Cable Chain Guide – See the LDO short guide here for tips.

BOM

3DEA PREMIUM VORON V2.4R2 DIRECT TYPE 300*300MM

CategoryDescriptionV2.4R2 QtyShipping Qty
FastenersM5x40 SHCS2224
M5x30 BHCS2224
M5x16 BHCS3537
M5x10 BHCS3537
M5 Hexnut1618
M5 Post-install T-nut6870
M5X10X1mm Shim/Spacer4244
M4 Knurled Nut (DIN 466-B)45
M4x6 BHCS78
M3x40 SHCS3032
M3x30 SHCS2527
M3x20 SHCS2224
M3x16 SHCS2022
M3x12 SHCS4143
M3X10 FHCS45
M3x8 SHCS187191
M3x6 BHCS1113
M3X6 FHCS89
M3 Hexnut67
M3 Post-install T-nut103107
M3 Hammer Head T-nuts6062
M3 Washer34
M3 Threaded Insert110115
M2x10 Self-tapping Screw1618
MotionGT2 80T Pulley (5mm ID 6mm W)4black
GT2 20T Pulley (5mm ID 6mm W)3black
GT2 20T Pulley (5mm ID 9mm W)4black
GT2 16T Pulley (5mm ID 6mm W)4black
GT2 20T Toothed Idler (5mm ID 6mm W)2black
GT2 20T Toothed Idler (5mm ID 9mm W)4black
F695-2RS Bearing20
625-2RS Bearing12
5x 60mm Shaft-Grind Flat4
5x35mm Shaft1
Gates GT2 Belt Loop (6mm W) – 188mm4
Gates GT2 Open Belt LL-2GT-9 (9mm wide) –
1010mm*4pcs—We will send 1*4600mm
1
BMG Extruder Componnets Kit1
Robotdigg 440C stainless steel linear rail MGN9H 400mm6
Robotdigg 440C stainless steel linear rail MGN12H 400mm1
Gates GT2 Open Belt LL-2GT-6 (6mm wide) –
2000mm*2pcs — We will send 1*4200mm
1
Electronics42STH48-2004MAH (0.9 degree)2
42STH20-1004ASH1
42STH48-2004AC4
Omron D2F-01L Micro Switch3
Omron TL-Q5MC2 NPN Inductive Probe1
Phaetus Dragon hotend high flow1
6*20 24V 60W heater cartridge 1m1
104GT-2 3*15mm therimistor wire 1m1
40X40X20 Centrifugal Blower Fan (24V) GDS dual ball bearing1
40x40x10 Axial Fan (24V) Sunon maglev dual ball bearing1
60x60x20 Fan (24V) GDS dual ball bearing3
Octopus V1.11
USB cable for Octopus V1.11
TMC2209 Stepper Motor Driver7
Mini 12864 Display1
10A 0-250V YB11B2-10A-Q Filtered Power Inlet1
Medium blower fuse 5X20 4A for 220V2
Raspberry Pi 4 / 3B+/ 3B (optional)0Not included
Mean Well LRS-200-24 PSU1
Mean Well LRS-25-5 PSU1
Omron G3NB-210B-1 SSR (10A)1
DIN Rail Mount Bracket for G3A SSR1
BAT85 Diode1
C13 Power Cord1
Thermal Fuse (125C)1
Vibration ManagementRubber Compressor Foot (38X19mm)4
OpenBuilds Angle Corner Connector4
FrameDIN 3 Rails (35mm W) – 415mm2
Misumi HFSB5-2020-2901
Misumi HFSB5-2020-3801
Misumi HFSB5-2020-4002
Misumi HFSB5-2020-420-TPW10
Misumi HFSB5-2020-480-LCP-RCP4
MiscFume Extractor Carbon Filter Element1
4mm Bowden Coupler ECAS041
PTFE Tube (4mm OD 3mm ID) – 1000m1
PTFE Tube (4mm OD 2mm ID) – 300mm1
6x3mm Round Neodimium Magnet8
3M VHB Tape 59521
Single Sided Foam Tape (5mm wide/1mm thick) 5m1
Single Sided Foam Tape (5mm wide/3mm thick) 5m1
Allen key with ball head pack 4pcs/pack
(2mm/3mm/4mm/5mm each size 1pc)
1
CablesNylon Cable Ties 4″  (0.07-0.1″) 1.8-2.7mm wide40
18AWG ptfe Wire  (black/red/green each 1.3met4meters
20AWG ptfe Cable (red 4 meters)4meters
22AWG ptfe Cable (250ft total) teflon cable (black/red each 25meters ,blue/green each 4meters ,brown 4meters)80meters
Female Spade Crimp Terminal 4.8mm Female (18-
22AWG .250″ 6.35mm)
7
Fork Spade Crimp Terminal (18-22AWG #10)5
Ring Crimp Terminal (16-22AWG #6)1
JST XH Connector 3 Position male/female pair plus pins ( XH2.54 housing 2pin female/15pcs male/9pcs XH2.54 housing 3pin female/17pcs male/7pcs
XH2.54 housing 4pin female/10pcs male/8pcs XH2.54 pin head female /130pcs  male/80pcs U terminal SV1.25-4S /26pcs XH2.54 header
1
Connector kit matching your controller choice1
Crimp Ferrule Kit (covering sizes 24AWG to
18AWG)
1
MicroFit3 Connector Plug 4 Position4
MicroFit3 Connector Plug 3 Position1
MicroFit3 Connector Plug 2 Position2
MicroFit3 Connector Receptacle 4 Position4
MicroFit3 Connector Receptacle 3 Position1
MicroFit3 Connector Receptacle 2 Position2
MicroFit3 Female Pin40
MicroFit3 Male Pin40
MLX power receptacle 3 position (bed wiring)1
MLX power plug 3 position1
MLX male pin6
MLX female pin6
WAGO 221-415 Lever-Nuts3
10×11 Generic Cable Chain (355mm) 2pcs1
10×15 Generic Cable Chain (495mm) 1pcs1
PanelsBlack bottom/deck panel – 419x419x3mm2
Black back panel – 433x453x3mm1
Transparent door – 216x453x3mm2
Transparent side – 433x453x3mm2
Transparent top – 433x433x3mm1
BuildplateMagnetic flexible build plate (spring steel sheet with one side smooth PEI the other side textured PEI) 300*300mm1
Precision Machined Cast Aluminum Build Plate/ MIC6 8mm1
Arlon Silicone AC Heater w/ NTC100K thermistor – 300x300mm (220V 600W), with 150C built in thermostat1
Weight25 kg

Reviews

There are no reviews yet.

Be the first to review “Voron V2.4 R2 300mm Kit (LDO, NO PI)”

Your email address will not be published. Required fields are marked *

SKU: 3DPKIT-VORON-300-R2 Category: Tags: , ,
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping