Shop » 3D Printer Kits » Voron V2.4 R2 350mm Kit (LDO, NO PI)
Voron V2.4 R2 350mm Kit (LDO, NO PI)
$1,999.90 Original price was: $1,999.90.$1,450.00Current price is: $1,450.00.
Voron 2.4 Corexy V2.4 R2 Version 3D Printer Kit with High Quality Parts 350*350mm DIY Kit
In stock
Look no further for your Voron 2.4 Kit – we have carefully sourced all the core components that you’ll need to build your very own Voron 2.4 R2. Available in all 2 sizes. The 2.4 R2 designed by Voron Design is arguably the best DIY 3D Printer project out there.
The Voron 2.4 R2 Kit includes all the core hardware that you will need to build your Voron. You will need to source your own 3D Printed parts, print them yourself or get them from us. The beauty of the Voron 2.4 is just how customizable it is. You can easily swap out core components for upgrades and modify them to your liking. The best part of all, is that you have to build the kit, so working on it will be a breeze. Our Kit includes a Phaetus Dragon High-Flow hotend that will allow you to use it in a Direct Drive Configuration (Afterburner).
For the different options please hover the question mark next to the selected option for additional information! You can upgrade to the LDO motors, simplify cabling, add the input shaper (PI required) or replace the hotend.
Kit includes a genuine Phaetus Dragon High Flow hotend!
Kit does not include a Raspberry PI!
Kit does not include the printed parts – we do offer full and functional kits. With the functional kit you can assemble the unit to a point where you can print the other parts yourself.
All our products are NZ stock and ready to ship.
Before buying this kit please note the following disclaimers/information.
- If you have never touched a 3D printer, do not buy this kit.
- It is recommended you read the assembly manual in completion before committing to purchase and build a kit.
- Please note that we do not provide technical / building support for these kits but there are video guides and hints and tips online.
Features & Extras
- Stainless Steel Linear Rails – 12H size rails for X axis included. No more worrying about rusty rails. You’ll still want to grease these rails, but you can do it at the end of your build.
- Small Tools – We include a small set of Allen key with ball head pack 2mm/3mm/4mm/5mm each size 1 pc.
- Aluminium Build Plate – MIC6 354*354*8mm build plate imported from USA.
- Arlon Silicone AC Heater – Edge to Edge special design with built in thermal fuse – so no extra assembly step for that.
- Genuine Phaetus Dragon High-Flow hotend.
- BTT Octopus v1.1 Control Board
Add-ons & Upgrades
- The hotend is optional and you can choose a different one
- You can upgrade to LDO motors if you prefer
- You can add the LDO Heat Insert Tool Kit
- You can add the ready wiring hardness for Octopus/Afterburner including the Afterburner Tool Head PCB Board 4.0, the X/Y Axis Limit Switch XH2.54 4PIN PCB Board, and the Z Axis Endstop PCB Board. If you add this, we’ll leave all standard connectors in the set in addition.
Tips
- Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_2_questions channel.
- Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when you encounter anything in the manual that is ambiguous or unclear.
- Check out Thomas Sanladerer’s and/or Nero 3DP’s Youtube channel, they have tons of videos on assembling Voron printers.
- Print a Voron Cube!
- Get a serial number once you finish building your Voron.
Guides
- Printed Parts: Since printed parts are NOT included with the kit, it’s recommended to get them here if you are unable to print them for yourself. These are the essential parts for a very reasonable cost to get your printer working. Refer to the Part Printing Guidelines section of the official assembly manual for general print settings. For the latest parts files, visit the Voron Github repository. If you do not have the means to print your own parts in ABS, the Voron Print It Forward program is a great option to obtain the parts at a very reasonable cost or you can get them from us if in stock.
- Wiring Guide – LDO have created this supplementary wiring guide which is similar to this kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components. Also look at the Octopus wiring directions.
- Cable Chain Guide – See the LDO short guide here for tips.
BOM
3DEA PREMIUM VORON V2.4R2 DIRECT TYPE 350*350MM | |||
Category | Description | V2.4R2 Qty | Shipping Qty |
Fasteners | M5x40 SHCS | 22 | 24 |
M5x30 BHCS | 22 | 24 | |
M5x16 BHCS | 35 | 37 | |
M5x10 BHCS | 35 | 37 | |
M5 Hexnut | 16 | 18 | |
M5 Post-install T-nut | 68 | 70 | |
M5X10X1mm Shim/Spacer | 42 | 44 | |
M4 Knurled Nut (DIN 466-B) | 4 | 5 | |
M4x6 BHCS | 7 | 8 | |
M3x40 SHCS | 30 | 32 | |
M3x30 SHCS | 25 | 27 | |
M3x20 SHCS | 22 | 24 | |
M3x16 SHCS | 20 | 22 | |
M3x12 SHCS | 41 | 43 | |
M3X10 FHCS | 4 | 5 | |
M3x8 SHCS | 187 | 191 | |
M3x6 BHCS | 11 | 13 | |
M3X6 FHCS | 8 | 9 | |
M3 Hexnut | 6 | 7 | |
M3 Post-install T-nut | 103 | 107 | |
M3 Hammer Head T-nuts | 60 | 62 | |
M3 Washer | 3 | 4 | |
M3 Threaded Insert | 110 | 115 | |
M2x10 Self-tapping Screw | 16 | 18 | |
Motion | GT2 80T Pulley (5mm ID 6mm W) | 4 | black |
GT2 20T Pulley (5mm ID 6mm W) | 3 | black | |
GT2 20T Pulley (5mm ID 9mm W) | 4 | black | |
GT2 16T Pulley (5mm ID 6mm W) | 4 | black | |
GT2 20T Toothed Idler (5mm ID 6mm W) | 2 | black | |
GT2 20T Toothed Idler (5mm ID 9mm W) | 4 | black | |
F695-2RS Bearing | 20 | ||
625-2RS Bearing | 12 | ||
5x 60mm Shaft-Grind Flat | 4 | ||
5x35mm Shaft | 1 | ||
Gates GT2 Belt Loop (6mm W) – 188mm | 4 | ||
Gates GT2 Open Belt LL-2GT-9 (9mm wide) – 1200mm*4pcs—We will send 1*5000mm | 1 | ||
BMG Extruder Componnets Kit | 1 | ||
Robotdigg 440C stainless steel linear rail MGN9H 400mm | 6 | ||
Robotdigg 440C stainless steel linear rail MGN12H 400mm | 1 | ||
Gates GT2 Open Belt LL-2GT-6 (6mm wide) – 2000mm*2pcs — We will send 1*4200mm | 1 | ||
Electronics | 42STH48-2004MAH (0.9 degree) | 2 | |
42STH20-1004ASH | 1 | ||
42STH48-2004AC | 4 | ||
Omron D2F-01L Micro Switch | 3 | ||
Omron TL-Q5MC2 NPN Inductive Probe | 1 | ||
Phaetus Dragon hotend high flow | 1 | ||
6*20 24V 60W heater cartridge 1m | 1 | ||
104GT-2 3*15mm therimistor wire 1m | 1 | ||
40X40X20 Centrifugal Blower Fan (24V) GDS dual ball bearing | 1 | ||
40x40x10 Axial Fan (24V) Sunon maglev dual ball bearing | 1 | ||
60x60x20 Fan (24V) GDS dual ball bearing | 3 | ||
Octopus V1.1 | 1 | ||
USB cable for Octopus V1.1 | 1 | ||
TMC2209 Stepper Motor Driver | 7 | ||
Mini 12864 Display | 1 | ||
10A 0-250V YB11B2-10A-Q Filtered Power Inlet | 1 | ||
Medium blower fuse 5X20 4A for 220V | 2 | ||
Raspberry Pi 4 / 3B+/ 3B (optional) | 0 | Not included | |
Mean Well LRS-200-24 PSU | 1 | ||
Mean Well LRS-25-5 PSU | 1 | ||
Omron G3NB-210B-1 SSR (10A) | 1 | ||
DIN Rail Mount Bracket for G3A SSR | 1 | ||
BAT85 Diode | 1 | ||
C13 Power Cord | 1 | ||
Thermal Fuse (125C) | 1 | ||
Vibration Management | Rubber Compressor Foot (38X19mm) | 4 | |
OpenBuilds Angle Corner Connector | 4 | ||
Frame | DIN 3 Rails (35mm W) – 465mm | 2 | |
Misumi HFSB5-2020-340 | 1 | ||
Misumi HFSB5-2020-430 | 1 | ||
Misumi HFSB5-2020-450 | 2 | ||
Misumi HFSB5-2020-470-TPW | 10 | ||
Misumi HFSB5-2020-530-LCP-RCP | 4 | ||
Misc | Fume Extractor Carbon Filter Element | 1 | |
4mm Bowden Coupler ECAS04 | 1 | ||
PTFE Tube (4mm OD 3mm ID) – 1000m | 1 | ||
PTFE Tube (4mm OD 2mm ID) – 300mm | 1 | ||
6x3mm Round Neodimium Magnet | 8 | ||
3M VHB Tape 5952 | 1 | ||
Single Sided Foam Tape (5mm wide/1mm thick) 5m | 1 | ||
Single Sided Foam Tape (5mm wide/3mm thick) 5m | 1 | ||
Allen key with ball head pack 4pcs/pack (2mm/3mm/4mm/5mm each size 1pc) | 1 | ||
Cables | Nylon Cable Ties 4″ (0.07-0.1″) 1.8-2.7mm wide | 42 | |
18AWG ptfe Wire (black/red/green each 1.3met | 3.9 | meters | |
20AWG ptfe Cable (red 4 meters) | 4 | meters | |
22AWG ptfe Cable (250ft total) teflon cable (black/red each 25meters ,blue/green each 4meters ,brown 4meters) | 82 | meters | |
Female Spade Crimp Terminal 4.8mm Female (18- 22AWG .250″ 6.35mm) | 7 | ||
Fork Spade Crimp Terminal (18-22AWG #10) | 5 | ||
Ring Crimp Terminal (16-22AWG #6) | 1 | ||
JST XH Connector 3 Position male/female pair plus pins ( XH2.54 housing 2pin female/15pcs male/9pcs XH2.54 housing 3pin female/17pcs male/7pcs XH2.54 housing 4pin female/10pcs male/8pcs XH2.54 pin head female /130pcs male/80pcs U terminal SV1.25-4S /26pcs XH2.54 header | 1 | ||
Connector kit for controller | 1 | ||
Crimp Ferrule Kit (covering sizes 24AWG to 18AWG) | 1 | ||
MicroFit3 Connector Plug 4 Position | 4 | ||
MicroFit3 Connector Plug 3 Position | 1 | ||
MicroFit3 Connector Plug 2 Position | 2 | ||
MicroFit3 Connector Receptacle 4 Position | 4 | ||
MicroFit3 Connector Receptacle 3 Position | 1 | ||
MicroFit3 Connector Receptacle 2 Position | 2 | ||
MicroFit3 Female Pin | 40 | ||
MicroFit3 Male Pin | 40 | ||
MLX power receptacle 3 position (bed wiring) | 1 | ||
MLX power plug 3 position | 1 | ||
MLX male pin | 6 | ||
MLX female pin | 6 | ||
WAGO 221-415 Lever-Nuts | 3 | ||
10×11 Generic Cable Chain (405mm) 2pcs | 1 | ||
10×15 Generic Cable Chain (545mm) 1pcs | 1 | ||
Panels | Black bottom/deck panel – 469x469x3mm | 2 | |
Black back panel – 483x503x3mm | 1 | ||
Transparent door – 241.5x503x3mm | 2 | ||
Transparent side – 483x503x3mm | 2 | ||
Transparent top – 483x483x3mm | 1 | ||
Buildplate | Magnetic flexible buildplate (spring steel sheet with one side smooth PEI the other side textured PEI) 354*354mm | 1 | |
Precision Machined Cast Aluminum Build Plate/ MIC6 354*354*8mm | 1 | ||
Arlon Silicone AC Heater w/ NTC100K thermistor – 346x346mm (220V 750W), with 150C built in thermostat | 1 |
Weight | 25 kg |
---|
Related products
- Quick ViewAdd to cart DetailsBuy Now
New motor design. Extruder Motor stays much cooler during printing. NOT suited for x and y axis. COOL POWER stepper motor. Compatible with PRUSA MK3 extruder motor.
- Quick ViewSelect options This product has multiple variants. The options may be chosen on the product page Details
This is the Voron edition of the Dragon Hotend is the new generation of 3D printing launched by Phaetus which adopts a full metal kit and high temperature resistance up to 500℃.
- Quick ViewAdd to cart DetailsBuy Now
This is a complete motor set for the Voron 2.4 by LKD. These are great motors without expensive branding.
- Quick View
Reviews
There are no reviews yet.