Category: Thermistors & Heaters

Thermistors & Heaters

Thermistors and heating rods for 3d printing

Showing all 12 results

Quick View
ATC SEMITEC 104GT-2 104NT-4-16C054RT Thermistor
$12.50 – $13.90
Rated 5.00 out of 5
ATC SEMITEC 104GT-2 104NT-4-16C054RT (made in Japan) 300°C
Select options
Quick View
Bi All Metal Hotend Kit For Sprite Ender-3 S1 CR10 Smart Pro 300°C
$42.90 – $49.90
This is an all metal hotend upgrade kit for the Ender-3 S1 Pro
Select options
Quick View
Heating Elements / Cartridge Heater
$7.90 – $12.90
3D Printer Cartridge Heater – Heating Element
Select options
Quick View
HS TZ2.0 Bambu Lab Hotend Upgrade Kit X1 X1Carbon P1P P1S Bi Metal CHT
$69.90
This is the HS TZ2.0 all metal/bi-metal hotend upgrade kit for the Bambu Lab X1 / P1P / P1S models with Bi Metal Heatbreak, 2x CHT HS (0.4, 0.6), and 1x HS 0.4mm Nozzle
Add to cart Buy Now
Quick View
F) white – 15*3mm – terminal XH2.54 – 1m: sold out
other options available
NTC 100K ohm 3950 Thermistor
$4.20 – $7.50
Rated 5.00 out of 5
NTC 3950 100K Thermistor
Select options
Quick View
PT100/PT1000 High Heat Thermistor
$19.90
PT100/1000 Thermistor with Heraeus probe
Select options
Quick View
Rapido | Rapido Plus Heater Block Kit
$89.90 – $99.90
Replacement heater block kit for the Phaetus Rapido Hotend HF & UHF
Select options
Quick View
Out of Stock
Sold Out
Sidewinder X1 / Genius Thermistor NTC3950 100k
$7.90
Artillery Sidewinder X1/X2 And Genius/Pro Replacement Thermistor
Read more

Quick View
Sidewinder X1/Genius Replacement Thermistor & 24V 64W Heater Cartridge
$14.90
Artillery Sidewinder X1/X2 And Genius/Pro Replacement Thermistor & 24V 64W Heater Cartridge
Add to cart Buy Now

Quick View
Thermistor & Heating Rod For Bambu Lab P1P 24V 48W 300°C
$19.90
Thermistor & Heating Rod For Bambu Lab P1P 24V 48W Ceramic Cartridge Heater 300°C
Add to cart Buy Now

Quick View
Thermistor & Heating Rod For Sprite Ender-3 S1 CR10 Smart Pro 300°C
$14.90 – $16.90
This is a replacement thermistor and heating rod for the Ender-3 S1 Pro and compatible products.
Select options

Quick View
Out of Stock
Sold Out
Thermistor For Sprite Ender-3 S1 CR10 Smart Pro 300°C
$7.90
Rated 5.00 out of 5
This is a replacement Thermistor Kit For Ender-3 S1 Pro Printer and compatible products.
Read more

Andrew Jackson

5

I was directed to 3D... Read More
I was directed to 3DEA by a work colleague as I was new to 3D printing and they were right about them. Great quality PLA (and many other types), awesome range of colours and great pricing. I've bought 4 different rolls so far and they have all been great, no clogging and brilliant print quality. Read Less

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less

Bryn Parrott

5

3DEA Carry a wide ra... Read More
3DEA Carry a wide range of filaments, from various known brands as well as their own brand. The service is superb, the product range wide, and the products print well. Nothing more to be said. Read Less

Write a review!

Category: Thermistors & Heaters

Thermistors & Heaters

ATC SEMITEC 104GT-2 104NT-4-16C054RT Thermistor

Bi All Metal Hotend Kit For Sprite Ender-3 S1 CR10 Smart Pro 300°C

Heating Elements / Cartridge Heater

HS TZ2.0 Bambu Lab Hotend Upgrade Kit X1 X1Carbon P1P P1S Bi Metal CHT

NTC 100K ohm 3950 Thermistor

PT100/PT1000 High Heat Thermistor

Rapido | Rapido Plus Heater Block Kit

Replacement heater block kit for the Phaetus Rapido Hotend HF & UHF

Sidewinder X1 / Genius Thermistor NTC3950 100k

Sidewinder X1/Genius Replacement Thermistor & 24V 64W Heater Cartridge

Thermistor & Heating Rod For Bambu Lab P1P 24V 48W 300°C

Thermistor & Heating Rod For Sprite Ender-3 S1 CR10 Smart Pro 300°C

Thermistor For Sprite Ender-3 S1 CR10 Smart Pro 300°C