Category: Nylon (PA6/PA12/HT)

Showing all 17 results

Quick View

eSun – ePA Natural Nylon Filament 1.75mm
$53.99
1kg - Natural
eSUN ePA Nylon 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now
Quick View

eSun – ePA-CF Natural (Black) Nylon-Carbon Fibre Composite1.75mm
$92.50
1kg - Carbon Fibre (Black)
Nylon-Carbon Fibre composite Natural (Black) 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now
Out of Stock
Sold Out
Quick View

eSun – ePA12 Black Nylon Filament 1.75mm
$103.50
1kg - Black
eSUN ePA12 Nylon 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Read more Details

Quick View

eSun – ePA12 White Nylon Filament 1.75mm
$103.50
1kg - White
eSUN ePA12 Nylon 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now

Quick View

eSun – ePA12-CF Natural (Black) Nylon-Carbon Fibre Composite1.75mm
$179.90
1kg - Carbon Fibre (Black)
PA12 Nylon-Carbon Fibre composite Natural (Black) 1.75mm Filament – with 15% carbon fibres comes on a vacuum packed 1KG Roll and is a tough material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now

Quick View

eSun – ePAHT-CF Natural (Black) 0.75kg Carbon Fibre Composite1.75mm
$164.90
0.75kg - Carbon Fibre (Black)
ePAHT-CF is a PA6-based material developed by eSUN and LUVOCOM, to which 15% high-rigidity carbon fibre has been added. The filament has high strength, mechanical and thermal properties higher than other nylon filaments.
Add to cart Details Buy Now

Quick View

Fiberon™ PA12-CF10 (PolyMide™ PA12-CF)
Original price was: $125.00.Current price is: $109.90.
0.5kg - Carbon Fibre (Black)
Fiberon PA12-CF10 is a premium carbon fiber reinforced long-chain copolyamide filament designed for demanding 3D printing applications. Engineered to combine excellent mechanical properties with low moisture sensitivity, this filament outperforms typical PA6/66 and PA6-based materials, offering greater dimension stability and improved surface finish. With the added benefits of Warp-free™ technology, fast printing, and high printer compatibility, Fiberon PA12-CF10 is the perfect choice for professionals seeking high-performance results at an affordable price.
Add to cart Details Buy Now

Quick View

Fiberon™ PA6-CF20 Black – Polymaker
$89.90
0.5kg - Black
Fiberon™ PA6-CF20 is a carbon fibre reinforced PA6 (Nylon 6) filament. The carbon fibre reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.
Add to cart Details Buy Now

Quick View

Fiberon™ PA6-GF25 Grey – Polymaker
$59.90
0.5kg - Black
Fiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.
Add to cart Details Buy Now

Quick View

Fiberon™ PA612-CF15 Black – Polymaker
$79.90
0.5kg - Black
Industrial carbon fiber reinforced copolymer of Nylon PA6 and PA12 / Features Polymaker’s Warp-Free™ and Fiber-Adhesion™ technology
Add to cart Details Buy Now

Quick View

Nylon – PA6 Black 1.75mm
$49.90
1kg - Black
Nylon PA6 Black 1.75mm Filament – comes on a vacuum packed 1kg cardboard roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now

Quick View

Nylon – PA6 White 1.75mm
$49.90
1kg - White
Nylon PA6 Black 1.75mm Filament – comes on a vacuum packed 1kg cardboard roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now

Quick View

PA6-CF Black Nylon-Carbon Fibre Composite1.75mm
$75.90
Rated 4.00 out of 5
1kg - Carbon Fibre (Black)
Nylon-Carbon Fibre composite Natural (Black) 1.75mm Filament – comes on a vacuum packed 1kg cardboard reel and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
Add to cart Details Buy Now

Quick View

PA6-GF Natural Nylon-Glass Fibre Composite1.75mm
$79.90
1kg - Glass Fibre Natural
Nylon Glass Fiber is a high quality filament of reinforced polyamide with glass fibers. This material is ideal for prototypes that need optimal mechanical and heat resistance. It comes on a vacuum packed 1KG cardboard reel.
Add to cart Details Buy Now

Quick View

PolyMide CoPA Black 1.75mm
$94.00
0.75kg - Black
Polymaker PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
Add to cart Details Buy Now

Quick View

PolyMide CoPA Natural 1.75mm
$94.00
0.75kg - Natural/Off-White
Polymaker PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
Add to cart Details Buy Now

Quick View

PolyMide PA6-CF 1.75mm
$84.00 – $299.90
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.
Select options This product has multiple variants. The options may be chosen on the product page Details

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less

Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

GLEN20

5

3dea is a real pleas... Read More
3dea is a real pleasure to deal with. Not only do they stock a great range of filament which you can get from other suppliers in NZ. They have a massive range of own-brand filament which is often unique to NZ and is of the highest quality. All in all, 3dea are highly recommended. Read Less

Write a review!

Category: Nylon (PA6/PA12/HT)

eSun – ePA Natural Nylon Filament 1.75mm

eSun – ePA-CF Natural (Black) Nylon-Carbon Fibre Composite1.75mm

eSun – ePA12 Black Nylon Filament 1.75mm

eSun – ePA12 White Nylon Filament 1.75mm

eSun – ePA12-CF Natural (Black) Nylon-Carbon Fibre Composite1.75mm

eSun – ePAHT-CF Natural (Black) 0.75kg Carbon Fibre Composite1.75mm

Fiberon™ PA12-CF10 (PolyMide™ PA12-CF)

Fiberon™ PA6-CF20 Black – Polymaker

Fiberon™ PA6-GF25 Grey – Polymaker

Fiberon™ PA612-CF15 Black – Polymaker

Nylon – PA6 Black 1.75mm

Nylon – PA6 White 1.75mm

PA6-CF Black Nylon-Carbon Fibre Composite1.75mm

PA6-GF Natural Nylon-Glass Fibre Composite1.75mm

PolyMide CoPA Black 1.75mm

PolyMide CoPA Natural 1.75mm

PolyMide PA6-CF 1.75mm

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA