Category: 3DEA PLA+

Name: 3DEA
Address: Keith Hay Court, Silverdale, Auckland, 0932
Rating: 4.6

This Premium PLA is made from NatureWorks 4032D polymer which is perfect for printing sturdy and accurate 3D models with ease. Like PLA Plus, PLA Pro is enhanced for better printing performance. The Eco-Pro Premium PLA Filament embodies all the salient qualities of this eco-friendly base material as well as the improvements in viscosity and strength.

Showing all 14 results

Quick View

Black PLA+ 1.75mm Filament
$27.90
Rated 5.00 out of 5
1kg - Black
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Bone White PLA+ 1.75mm
$27.90
1kg - Bone White
Standard Bone White quality 1.75mm Filament – comes on a vacuum packed eco friendly cardboard spool.
Add to cart Details Buy Now
Quick View

Dark Green PLA+ 1.75mm
$27.90
1kg - True/Dark-Green
Standard Dark Green quality 1.75mm Filament – comes on a vacuum packed 1kg Roll.
Add to cart Details Buy Now
Quick View

Graphite PLA+ 1.75mm Filament
$27.90
Rated 5.00 out of 5
1kg - Graphite
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Grey PLA+ 1.75mm
$27.90
Rated 5.00 out of 5
1kg - Grey
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Light Green PLA+ Eco Pro 1.75mm Filament
$27.90
1kg - Light Green
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Milk White PLA+ 1.75mm
$27.90
1kg - Milk White
Standard Milk White (warm white) quality 1.75mm Filament – comes on a vacuum packed eco friendly cardboard spool.
Add to cart Details Buy Now
Quick View

Neon Pink PLA+ 1.75mm
$27.90
1kg - Fluorescent Pink
PLA+ Neon Pink (Fluorescent) quality 1.75mm Filament – comes on a vacuum packed eco friendly cardboard spool.
Add to cart Details Buy Now
Quick View

Olive Green PLA+ 1.75mm
$27.90
1kg - Olive Green
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Paper White PLA+ 1.75mm Filament
$27.90
1kg - Paper White
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Peacock Blue PLA+ 1.75mm
$27.90
1kg - Peacock Blue
Peacock Blue quality 1.75mm Filament – comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now
Quick View

Peak Green PLA+ Eco Pro 1.75mm Filament
$27.90
1kg - Peak Green
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Red PLA+ Eco Pro 1.75mm Filament
$27.90
Rated 5.00 out of 5
1kg - Red
3DEA Eco Pro PLA+ Filament comes on a vacuum packed cardboard reel which makes this an eco friendly option. Engineered for better printing performance.
Add to cart Details Buy Now
Quick View

Yellow PLA+ 1.75mm
$27.90
1kg - Yellow
Standard Yellow quality 1.75mm Filament – comes on a vacuum packed eco friendly cardboard spool.
Add to cart Details Buy Now

GLEN20

5

3dea is a real pleas... Read More
3dea is a real pleasure to deal with. Not only do they stock a great range of filament which you can get from other suppliers in NZ. They have a massive range of own-brand filament which is often unique to NZ and is of the highest quality. All in all, 3dea are highly recommended. Read Less
Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

Write a review!

Category: 3DEA PLA+

Black PLA+ 1.75mm Filament

Bone White PLA+ 1.75mm

Dark Green PLA+ 1.75mm

Graphite PLA+ 1.75mm Filament

Grey PLA+ 1.75mm

Light Green PLA+ Eco Pro 1.75mm Filament

Milk White PLA+ 1.75mm

Neon Pink PLA+ 1.75mm

Olive Green PLA+ 1.75mm

Paper White PLA+ 1.75mm Filament

Peacock Blue PLA+ 1.75mm

Peak Green PLA+ Eco Pro 1.75mm Filament

Red PLA+ Eco Pro 1.75mm Filament

Yellow PLA+ 1.75mm

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA